How to avoid excavator problem? With so many pieces of equipment available from so many different places, it can be challenging to know how to choose the best used excavator. And how much money should you spend on one? If you buy the wrong machine or spend too much for one that is poorly taken care of, the equipment can become a major financial drain on your tree service business.
Imagine buying a used machine, only to find out a few months later that the hydraulic system is leaking, the engine has severe wear, or the undercarriage is on the verge of failure. These issues not only affect performance but can also drastically decrease the value of your investment, leaving you with more costs than you initially bargained for.
So every time you’re about to buy an excavator, or any other piece of expensive machinery for that matter, don’t just look at the machine. You also want to know what potential hidden problems could be lurking. Make your excavation business more profitable by spending a few minutes now looking for hidden problems with the excavator you are about to buy.

Table of Contents
Toggle1. Common Excavator Problem to Watch Out For
Before you go any further, become familiar with the top 8 to 15 pieces of equipment problems that maybe you don’t know to look for on that particular piece of equipment.
| Problem | Description | Signs to Look For |
| Hydraulic Issues | Leaks, pressure drops, and fluid contamination in the hydraulic system can reduce efficiency. | Unusual noises, low pressure, visible leaks |
| Engine Problems | Worn-out components or poor maintenance can lead to reduced engine life. | Poor performance, excessive exhaust smoke, high oil consumption |
| Undercarriage Wear | Damage or uneven wear on tracks, rollers, and sprockets. | Uneven tracks, excessive vibration, worn rollers |
| Electrical Failures | Faulty wiring, malfunctioning batteries, and electrical systems. | Dead battery, flickering lights, faulty controls |
| Attachment Damage | Wear and tear on bucket teeth and attachments can lead to inefficiency. | Cracked or bent bucket teeth, uneven attachment wear |
2. How to Inspect the Engine for Excavator Problem
The engine is considered the heart of any excavator. Just like you have your heart checked periodically, you also need to check an excavator’s engine.
| Inspection Step | What to Look For |
| Check Oil and Coolant | Inspect fluid levels and the condition of the oil and coolant. Dark oil or low levels indicate neglect. |
| Test Engine Performance | Start the engine and listen for any unusual noises. Watch for rough idling, slow acceleration, or misfires. |
| Examine Exhaust | Check for smoke and unusual emissions. Blue or black smoke may indicate engine problems. |
By doing these simple tests or having the seller perform them while you watch, you can tell if the engine is running well, or if it’s hiding major problems that will cost you a fortune down the road.
3. Identifying Hydraulic System Issues
Hydraulics problems are some of the most expensive problems you can have on an excavator.Here’s how you can check for them:
| Inspection Step | What to Look For |
| Check for Leaks | Inspect hydraulic lines, hoses, and cylinders for leaks or signs of wear. |
| Test Hydraulic Pressure | Operate all hydraulic functions and check for uneven or slow movements, indicating low pressure. |
| Examine Fluid Quality | The hydraulic fluid should be clean and free from contaminants. Murky or dirty fluid could indicate poor maintenance. |
Hydraulics problems on Excavators are real money pits because this work is very, very expensive. Fixing hydraulic problems starts in the thousands and goes up by multiples of that. This is a gold mine for any service provider fixing excavators. Now you know how to keep it in your pocket instead.
4. Evaluating the Undercarriage and Tracks
Hydraulic problems on Excavator problem are real money pits because this work is very, very expensive. Fixing hydraulic problems starts in the thousands and goes up by multiples of that. This is a gold mine for any service provider fixing excavators. Now you know how to keep it in your pocket instead.
| Inspection Step | What to Look For |
| Track Wear | Check the tracks for excessive wear, cracks, or missing links. |
| Track Tension | Ensure the track tension is correct—too tight or too loose indicates problems. |
| Uneven Wear | Uneven wear across the tracks or rollers could signal alignment issues or misusage. |
The undercarriage is like the tires on your car. It’s not a sexy problem to have on an excavator, but it can be a big one. If you want your car to work well and last a long time, check the tires. If you want your excavator to work well and last a long time, check the undercarriage.
5. Assessing the Excavator’s Electrical System
Electrical excavator problems can be very tricky and expensive, especially if it’s something like a starter, which tends to be an electrical problem, or a control system.
| Inspection Step | What to Look For |
| Check Battery Condition | Look for signs of corrosion or poor charging. A weak battery can lead to failure during operations. |
| Examine Wiring and Connectors | Inspect all wiring for exposed cables, fraying, or rust. Corroded connectors can lead to electrical failures. |
| Test Control Systems | Operate all control systems and gauges to ensure they’re working correctly. |
The electrical system itself is vital and could be the root cause of a lot of the mechanical problems, so you want to be thorough in checking the electrical.

6. Inspecting the Bucket and Attachments of excavator problem
The bucket and all its attachments are key to the performance and efficiency of the excavator.Check for these common issues:
| Inspection Step | What to Look For |
| Bucket Teeth | Inspect teeth for wear, cracks, or bending, which could affect digging performance. |
| Attachment Compatibility | Check that attachments are compatible with the machine and in good working order. |
Attachments are usually not made as tough as the kettle itself. Thus, take a good look at the end of it, and make sure it’s not fractured. Give it a good shake. If it wiggles so much that you’re concerned it’s going to fall off, it’s probably not that strong. Don’t buy it or ask for a reduction in price.
7. Ask the Right Questions to the Seller
Sometimes you just have to ask. The operator may not know the answer, but the owner, repair shop, or dealer might. Ask if they’ve repaired it. If the repair has been a problem, they usually have repaired it again. It costs twice as much to have a chronic problem repaired the second time. But if the same owner has it repaired thrice, everybody wants to fix it again. So, if you do ask, you can get some positive answers.
| Question | Why It’s Important |
| Can I see maintenance records? | Verifies that the excavator has been properly maintained. |
| Why is the machine being sold? | Helps to gauge the reasons behind selling and whether there are hidden issues. |
| Has the excavator been in any accidents? | Knowing its history helps to avoid buying a machine with undetected damage. |
If you can ask yourself questions like these, you can go out there, look at anything, and do your analysis about buying or not buying.
8. How to Test the Excavator Problem Before Buying
If you can ask yourself questions like these, anytime you’re out there looking at equipment, you can examine it, determine what’s good about it, what’s bad about it, should you buy it, or no, don’t buy the piece of equipment under any circumstances.
| Test Step | What to Look For |
| Start-Up Test | Check for smooth startup and listen for abnormal sounds like rattling or knocking. |
| Operating Test | Test all functions—boom, arm, and swing—ensuring they move smoothly. |
| Performance Under Load | Put the excavator to work under load to check for any strain, performance issues, or delays. |
Don’t toy around with your questions. Get your answer and know it’s true. QStrings like, “Is it possible the struts are bad?” No, it’s not possible. Test the equipment under real working conditions to prove its worth or find the hidden costs and expenses on excavator problem.
9. What to Do if You Discover Excavator Problems During Inspection
If you find issues during the inspection, here’s how to handle them:
| Step | What to Do |
| Negotiate Price | Use the problems you find as leverage to lower the price. |
| Get Repair Estimates | Ask for an estimate for fixing any problems and factor that into the final cost. |
| Decide to Walk Away or Proceed | If the problems are too severe or expensive to fix, consider walking away. |
Knowing how and what inspections to order when selling your property gives you the upper hand when you deal with potential buyers.
Conclusion
In short, taking the time to have a used excavator inspected before you buy it can save you a lot of headache down the road. By understanding common problems, knowing the right items to check, you can ensure your investment is solid and you have no hidden costs awaiting you.
Before you lay down the cash, check the engine, hydraulics, undercarriage, electrical, and attachments. Ask the right questions, do a full test, and do not be afraid to negotiate the price if you find problems. Follow these steps to buy a used excavator with confidence, knowing you won’t have any nasty surprises. If you want more information about excavator problem, please contact with us and follow us on Youtube.